Methicillin-resistant Staphylococcus pseudintermedius has rapidly emerged as a leading cause of SSIs in dogs.1 The impact of SSIs can include increased treatment costs and patient morbidity as well as frustration of pet owners and medical caregivers alike.2–4 Surgical site infections with MRSP can be difficult to treat because this bacterium often is multidrug resistant1,5,6 and forms biofilms,5,7 a known virulence factor in other staphylococcal species.8,9
A biofilm is a population of bacteria irreversibly attached to a surface and enclosed in a self-produced extracellular polymeric matrix. Biofilm-associated bacteria have low metabolic rates and are therefore less susceptible to antimicrobials that target rapid division and growth than are planktonic (free-living or nonbiofilm-associated) bacteria. Biofilms also provide a unique environment that facilitates the efficient exchange of resistance genes among bacteria.9,10 Finally, the extracellular polymeric matrix acts as a physical protective barrier for the bacteria, binding the host's immune system cells and antimicrobials, preventing contact with their intended target.9
Biofilm formation on orthopedic implants is of particular concern, given that it may complicate treatment of SSIs.9 Routine treatment of such infections involves reopening and lavage of the surgical site and long-term treatment with systemic antimicrobials, which may kill planktonic bacteria being released from a biofilm (at the end of the life cycle) and alleviate acute signs of infection but has no impact on the biofilm itself.11,12 For this reason, biofilm-associated SSIs often cannot be resolved with routine treatment and necessitate removal of the implant.3,12 With such a devastating consequence, prevention of biofilm formation is imperative for successful patient outcome. One such prophylactic measure is the inclusion of antimicrobial additives in PMMA, which is a fixative commonly used in total joint arthroplasty, spinal fracture fixation, and other orthopedic and neurologic procedures.13–15
Polymethylmethacrylate impregnated with gentamicin is widely available for use in human and veterinary orthopedics.16–19 Local delivery of gentamicin is thought to provide higher concentrations of the drug than can safely be achieved parenterally.16–19 Such high concentrations are anecdotally thought to be bactericidal even against bacteria that are resistant to gentamicin on the basis of serum breakpoints or against bacteria that are embedded within a biofilm. Other substances can also be added to PMMA, alone or in combination with gentamicin,20–22 including a silver compounda that recently became commercially available. Materials coated or impregnated with silver have been studied for the prevention or treatment of various infections23–26 and have become a popular alternative antibacterial substance because of increasing antimicrobial resistance in recent years.
Despite the widespread use of gentamicin-impregnated PMMA in dogs and the increasing prevalence of MRSP SSIs,1,2,4 to our knowledge, the impact of PMMA additives on MRSP biofilm formation has not previously been evaluated. The objective of the study reported here was to evaluate the impact of PMMA impregnated with gentamicin and silver, alone and in combination, on biofilm formation of MRSP susceptible and not susceptible to gentamicin. We hypothesized that gentamicin-impregnated PMMA would prevent biofilm formation of gentamicin-susceptible MRSP isolates only and that silver-impregnated PMMA (alone or in combination with gentamicin) would prevent MRSP biofilm formation regardless of gentamicin susceptibility.
Materials and Methods
PMMA bead preparation
Polymethylmethacrylate beads (diameter, 7 mm) were formed under aseptic conditions in accordance with the manufacturer's instructions. Four PMMA bead groups were studied: no additive (control),b 1% silver (0.25-g, 10-μm particle microsilver antimicrobial powder added to additive-free PMMA for 1% final concentration),a,b 1.25% gentamicin,c and 1.25% gentamicinc and 1% silver (1 vial of microsilver antimicrobial powder combined with gentamicin-impregnated PMMA).a,c
MRSP isolates
Ten epidemiologically unrelated MRSP isolates obtained from infected dogs and previously determined to be strong biofilm producers7 were selected. Isolates had been identified as MRSP by species-specific PCR assay and detection of the gene mecA by PCR assay or detection of PBP2a protein by the latex agglutination test.27 Isolates were stored at −80°C in cryopreservation medium.d Gentamicin MIC was determinede; isolates were categorized as susceptible or resistant to gentamicin according to Clinical and Laboratory Standards Institute guidelines.28
Impact of PMMA additive on MRSP biofilm formation
Isolates were subcultured onto blood agar plates overnight at 37°C. Resulting colonies were inoculated in 5 mL of TSB with 1% glucose and verified to be 0.5 McFarland standard (approx 108 CFU/mL)29–32 suspensions by use of a calibrated spectrophotometer. Suspensions were vortexed to break up preexisting cell clusters, PMMA beads of each type were introduced, and the combination was incubated overnight at 37°C. These steps followed an established model for growing biofilms.30 Isolates were tested in triplicate for each PMMA bead group. Beads with no additive (control) were also added to 5 mL of TSB containing 1% glucose without bacteria as a negative control.
After incubation, beads were removed and rinsed 3 times in 2 mL of PBS solution to remove planktonic (nonadherent) bacteria.30 Following rinsing, beads were transferred into sterile test tubes containing 5 mL of TSB containing 1% glucose and sonicatedf for 5 minutes to remove biofilm-associated (adherent) bacteria, followed by 1 minute of vortexing to ensure even suspension.31,33,34 Resulting suspensions were used to create serial dilutions up to 10−6. One hundred microliters of each dilution was inoculated onto blood agar and incubated overnight at 37°C. The following day, CFUs were manually counted and the number recorded. Counts on plates containing between 20 and 200 colonies (excluding dilution series where the lowest dilution had < 20 colonies) were used to calculate mean colony-forming units per milliliter (the measure of biofilm formation) for each PMMA bead group and MRSP isolate combination.
Scanning electron microscopy
To validate sonication for removing biofilm from the beads and to confirm the presence of biofilm on the beads after incubation and PBS solution rinsing, imaging of a small subset of beads before and after sonication was performed. Pairs of additive-free and gentamicin-impregnated beads were incubated in separate 0.5-McFarland standard suspensions of 5 mL of TSB with 1% glucose overnight at 37°C. Two of the 10 MRSP isolates were arbitrarily selected. All beads were rinsed 3 times with 2 mL of PBS solution. One bead from each pair was immediately fixed in 2% glutaraldehyde solution after rinsing. Remaining beads were placed in separate sterile tubes containing 5 mL of TSB with 1% glucose and sonicated for 5 minutes, then fixed in 2% glutaraldehyde. All fixed beads were kept at 4°C until the time of further processing. One day before image acquisition, beads were rinsed 3 times with Sørensen phosphate buffer (0.07M; pH, 6.8) for 10 minutes each time, postfixed with 1% osmium tetroxide for 1 hour at 22°C, washed in Sørensen phosphate buffer 3 times for 15 minutes each, and dehydrated through an ethanol series (50%, 70%, 80%, 90%, and 95%) for 15 minutes each. Beads were then dehydrated 3 times in 100% ethanol for 15 minutes each, critical-point dried, mounted onto metal specimen stubs with carbon paint, and sputter coated with gold and palladium (coating thickness, 20 nm). Within 24 to 48 hours after this treatment, the beads were imaged with a scanning electron microscope.g Beads were subjectively evaluated for the presence of adherent bacteria and extracellular matrix.
Statistical analysis
Statistical analysis was performed with statistical software.h There were 2 fixed factors: PMMA bead group and bacterial isolate. An interaction between CFU count and PMMA bead group was included in the model. Log transformation was performed on the CFU data. To assess the ANOVA assumptions, residual analyses were performed. This included formally testing the residuals for normality by means of Shapiro-Wilk, Kolmogorov-Smirnov, Cramer-von Mises, and Anderson-Darling tests. In addition, residuals were plotted against the predictive values and explanatory variables used in the model to identify any outliers, unequal variance, or other issues that needed further investigation. Analysis showed the need to allow for unequal variance (on the basis of an improved model fit stated by the Akaike information criterion); otherwise, all the ANOVA assumptions appeared to be adequately met and no outliers were identified. Within susceptible or nonsusceptible bacterial isolates, contrasts were conducted to compare the bead treatments as determined on the basis of Clinical and Laboratory Standards Institute breakpoints (susceptible, ≤ 4 μg/mL).28 Results are reported as mean ± SD. Values of P ≤ 0.05 were considered significant.
Results
Of the 10 isolates evaluated, 4 were susceptible to gentamicin (MIC, ≤ 4 μg/mL), with MICs ranging from 0.047 to 0.19 μg/mL; 1 had intermediate susceptibility to gentamicin (MIC, > 4 and ≤ 8 μg/mL), with an MIC of 6 μg/mL; and 5 were nonsusceptible to gentamicin (MIC, > 8 μg/mL). The intermediate susceptibility isolate was grouped with the nonsusceptible isolates for the purpose of this study. None of the PMMA additives completely inhibited MRSP biofilm formation. Mean ± SD CFU counts for each isolate were determined after log10 transformation (Table 1). When all isolates were grouped together regardless of gentamicin susceptibility, there was a significant effect of gentamicin (P < 0.001) and gentamicin and silver (P < 0.001), compared with controls. There was no impact of silver alone (P = 0.789) nor was there a difference between gentamicin and gentamicin plus silver (P = 0.415). When only isolates not susceptible to gentamicin were evaluated, there were no significant differences among PMMA additive groups. For gentamicin-susceptible isolates, there was an impact of gentamicin and gentamicin plus silver (P < 0.001 for each treatment) but no impact of silver alone (P = 0.653) and no difference between gentamicin and gentamicin plus silver (P = 0.117).
—Mean CFU counts (CFUs/mL) after log10 transformation for each of 10 MRSP isolates following incubation with PMMA beads impregnated with gentamicin, silver, gentamicin and silver, or no additive (control).
MRSP isolate | Gentamicin | Gentamicin and silver | Silver | Control | Gentamicin susceptibility |
---|---|---|---|---|---|
1 | 3.44 | 3.28 | 7.37 | 7.34 | S |
2 | 5.19 | 5.20 | 6.98 | 7.06 | S |
3 | 4.11 | 3.74 | 6.42 | 6.11 | S |
4 | 4.94 | 4.08 | 6.96 | 7.62 | S |
5 | 6.40 | 6.78 | 6.86 | 6.39 | NS |
6 | 6.75 | 6.38 | 7.02 | 7.42 | NS |
7 | 7.28 | 7.28 | 7.41 | 7.66 | NS |
8 | 7.39 | 7.44 | 7.41 | 7.50 | NS |
9 | 7.53 | 7.92 | 7.49 | 7.08 | NS |
10 | 7.18 | 7.15 | 7.34 | 7.41 | NS |
Mean ± SD | |||||
All isolates | 6.01 ± 1.49 | 5.92 ± 1.71 | 7.13 ± 0.34 | 7.16 ± 0.52 | — |
Susceptible to gentamicin | 4.42 ± 0.8 | 4.01 ± 0.82 | 6.93 ± 0.39 | 7.03 ± 0.66 | — |
Not susceptible to gentamicin | 7.08 ± 0.43 | 7.16 ± 0.54 | 7.26 ± 0.26 | 7.24 ± 0.46 | — |
— = Not applicable. NS = Not susceptible (includes isolates categorized as resistant [MIC, > 8 μg/mL] or having intermediate susceptibility [MIC, > 4 and ≤ 8 μg/mL; n = 1 {isolate 5}] to gentamicin.28). S = Susceptible (MIC of gentamicin, ≤ 4 μg/mL).
Scanning electron microscopy of PMMA beads that were incubated with MRSP and rinsed with PBS solution but not sonicated revealed numerous staphylococci individually adherent to the beads as well as present within extracellular polymeric matrix material, consistent with a biofilm10,34,35 (Figure 1). Staphylococci and extracellular polymeric matrix could not be identified on beads that had been incubated with MRSP, rinsed, and then sonicated.
Discussion
The results of the present study revealed that gentamicin-impregnated PMMA beads can be effective in reducing in vitro MRSP biofilm formation on this surface, but only for isolates that are susceptible to gentamicin as determined by standard serum breakpoints. This may seem intuitive; however, clinical breakpoints are, in part, determined on the basis of anticipated drug concentrations at the site of infection, so they cannot necessarily be directly applied to situations where higher drug concentrations might be achieved, such as with antimicrobial-impregnated PMMA beads. Accordingly, local treatment such as this is often used clinically for prophylaxis or treatment of SSIs on the assumption that high antimicrobial concentrations are achieved and that resistance can be overwhelmed. Although that might occur in some situations, it does not appear to be the case for MRSP and gentamicin-impregnated PMMA beads. Further in vivo investigation is required to determine the biological relevance of our findings.
Biofilm formation of our isolates not susceptible to gentamicin in the present study was not affected by the presence of gentamicin, despite the fact that one of the nonsusceptible isolates was classified as of intermediate susceptibility and the highest MIC was only 16 μg/mL, the clinical breakpoint for resistance. These findings are consistent with results of a study36 on other staphylococcal species and may indicate that elution of gentamicin from PMMA is minimal or that gentamicin concentration at the bead surface is not particularly high (perhaps not any higher than that achieved with parenteral administration), or both. Low surface area-to-volume ratio, as was the case with our PMMA beads, has been shown to limit elution37 and certainly limits the amount of gentamicin present on the bead surface, with a greater percentage present in the interior of the bead and therefore biologically inactive.
Gentamicin-impregnated PMMA is commonly used in total joint arthroplasty, spinal fracture fixation, and other orthopedic and neurologic procedures as a prophylactic measure17,38–41 as well as a method of local treatment of implant-associated SSIs.18,42,43 The present study investigated its efficacy at preventing MRSP biofilm formation, not its efficacy at eliminating established biofilm. The potential impact of antimicrobial-impregnated PMMA on existing MRSP biofilm formation is not known, nor to our knowledge has the clinical efficacy of this treatment been investigated. Our data could suggest that gentamicin-impregnated PMMA would be as effective as systemic treatment of infection caused by gentamicin-susceptible isolates, but that may have no impact on MRSP isolates not susceptible to gentamicin. This is of concern because MRSP is the leading cause of implant-associated SSI in dogs,1–4 and isolates are frequently gentamicin resistant.1,6 Currently, many MRSP isolates remain susceptible to amikacin44–47 and investigation into the impact of amikacin-impregnated PMMA on MRSP infection and biofilm formation on this surface should be performed.
With high rates of antimicrobial resistance, silver may be an ideal antimicrobial alternative, considering that induction of resistance to silver is suspected to be low. As well, silver has several other appealing characteristics. Silver kills its target through multiple mechanisms, including interruption of cell respiration, electron transport, and DNA replication.26 It has been described as having entire-spectrum activity, meaning it is capable of killing bacteria, yeasts, and molds.24 Furthermore, nanosilver, characterized by particle size < 100 nm, has been found to have antiviral activity.48 Of the transition metals that exert antibacterial activity, silver is considered the safest.24
Despite the appealing properties of silver, the silver product used in the present study was found to be ineffective in reducing MRSP biofilm formation on PMMA beads in vitro. Our findings are in contrast to results of another study36 in which 1% microsilver-impregnated PMMA killed all adherent (biofilm-associated) MRSA. The failure of the silver product used in our study could be related to a number of factors, including particle size, incubation time, silver concentration, and resistance of the MRSP to silver.
Silver may be better able to exert bactericidal effects as a smaller particle than it is in larger form.23,49 Exact size at which silver is most effective is not yet known. The silver product used in this study could have been too large (10 μm) to be an effective antimicrobial. Large particle size may render silver ineffective at damaging bacterial cells through attachment and invasion49 and could restrict elution, something that could be both beneficial (maintaining antibacterial activity at the bead surface while limiting systemic exposure) and detrimental (limiting activity at the site of infection). The optimal elution characteristics of PMMA are not known, and the low surface area-to-volume ratio of our 7-mm-diameter beads would result in a large percentage of added silver being present in the interior of the bead and therefore biologically inactive. Regardless, the lack of efficacy noted here at the bead surface is concerning, given that it is difficult to see how there would be the potential for clinically relevant antimicrobial activity in patients. The relationship of silver particle size to its ability to inhibit MRSP biofilm formation on PMMA could not be evaluated in the present study but is an important consideration for future research. Particularly, evaluation of a nanosilver PMMA additive may be considered. Although a concern of possible toxic effects with the use of nanosilver exists, other investigators have found that the addition of silver solution with a 10-nm particle size to growth media inhibits a significant percentage of MRSA growth and is not cytotoxic to human epithelial cells.26 In contrast, silver solution with a 100-nm particle size is the least effective against MRSA and the most cytotoxic to human epithelial cells.26 Other studies have also demonstrated the bactericidal efficacy of nanosilver as a PMMA additive against Escherichia coli,50 Staphylococcus aureus22 (including MRSA51), and several other bacteria26,52–54 when used in wound dressings.
If particle size does restrict elution, then only the silver present on the surface of our 1% silver-impregnated PMMA beads would exert antimicrobial activity. In experiments that used a silver product comparable to that of the present study, Alt et al36 found that 1% silver-impregnated PMMA completely inhibited bacterial growth of all strains tested, including MRSA. However, those investigators used PMMA samples with a larger surface area-to-volume ratio,36 further suggesting that the silver concentration present on the surface of the PMMA bead may be a key factor in the antimicrobial activity of the silver compound used in this study. Although PMMA impregnated with silver at concentrations > 1% have not been previously reported,14,17 concentration selection may not account for particle size and associated elution characteristics. The silver product used in our study could potentially prove efficacious if a larger concentration were incorporated into the PMMA, allowing for a greater percentage of silver molecules to be present at the bead surface. If mechanical strength is not compromised, an increase in silver concentration can be considered.
Another potential contributing factor to the lack of efficacy of the silver product used in our study may be silver resistance among the MRSP isolates used. Although induction of resistance to silver is suspected to be low, it remains a possibility. Several studies51,53,54 have found bacteria, including MRSA,51 that contain silver resistance genes. Furthermore, investigators in another study52 induced silver resistance in MRSA, with phenotypically unique colonies surviving on silver-infused media. Silver resistance among MRSP has not yet been investigated, and further study is required.
A final factor that may have affected our results was incubation time. Our PMMA beads were incubated with MRSP for 18 to 24 hours. We chose this time period because biofilm formation occurs rapidly in vivo, and the first few hours following implantation of a medical device are likely critical in determining whether bacteria with the ability to form a biofilm or host molecules will first populate the implant surface.10,55 However, other studies have demonstrated greater efficacy of antimicrobials given a longer incubation period. One study56 demonstrated reduced biofilm formation (adhered bacteria) of S aureus on gentamicin-impregnated PMMA after 24, 48, or 72 hours, depending on the PMMA product used, compared with nonimpregnated PMMA. Studies52–54 assessing antimicrobial efficacy of silver in wound dressings showed that periods of 24 or even 48 hours were required to demonstrate microbial cell death. The goal of our study was to determine whether gentamicin- and silver-impregnated PMMA could inhibit biofilm formation of MRSP in vitro during the time thought to be crucial for this activity following implantation of PMMA. Further study is required to determine the effect of a prolonged incubation time on MRSP biofilm formation with silver- or gentamicin-impregnated PMMA.
Results of scanning electron microscopy experiments confirmed the presence of biofilm and associated bacteria on the surface of the PMMA beads following incubation. In addition, it demonstrated the persistence of biofilm after rinsing in PBS solution and its removal by sonication. These findings confirm that the CFUs recovered following sonication were biofilm associated.31–34
Several limitations of the present study should be considered when evaluating the findings. The dynamic state of an animal certainly differs from the static conditions of laboratory testing. More difficult yet, biofilm phenotypes are diverse and very difficult to predict, and biofilm readily develops under a range of conditions.57 Thus, a truly representative in vitro model does not exist, and the biofilm phenotype rendered in a laboratory setting may be quite different from those found in vivo. We also used 7-mm-diameter PMMA bead samples and do not know how this compares with the surface area-to-volume ratio, elution characteristics, and other contributing factors in the bactericidal efficacy of PMMA used for fixation in total joint arthroplasty, spinal fracture fixation, and other orthopedic and neurologic procedures. Finally, our study involved a robust MRSP challenge, inoculating PMMA beads with approximately 108 MRSP CFUs. This challenge, albeit commonly used for in vitro biofilm studies,29–32 may not be representative of in vivo situations.
We found that gentamicin-impregnated PMMA was effective in reducing, but not completely inhibiting, biofilm formation of gentamicin-susceptible MRSP in vitro. Furthermore, gentamicin-impregnated PMMA had no effect on MRSP isolates not susceptible to gentamicin. Silver-impregnated PMMA created with a microparticulate silver compound was not effective at reducing MRSP biofilm formation in our study, and addition of the silver particles to gentamicin-impregnated PMMA did not significantly improve its efficacy against biofilm-associated MRSP. With rising antimicrobial resistance, further investigation into alternative antimicrobials for impregnating PMMA, including silver additives, is warranted.
Acknowledgments
Supported in part by the Ontario Veterinary College Pet Trust Fund. Ms. Morrison was supported by a Merial Veterinary Scholars Summer Student Fellowship. BioMedtrix Inc donated PMMA and the silver additive.
Presented as a poster at the Merial Veterinary Scholars Symposium, Michigan State University, East Lansing, Mich, August 2013; and as a poster at the 3rd American Society of Microbiology Conference on Methicillin-Resistant Staphylococci in Animals, Copenhagen, November 2013.
The authors thank Alexandra Smith for technical assistance with scanning electron microscopy.
ABBREVIATIONS
MIC | Minimum inhibitory concentration |
MRSA | Methicillin-resistant Staphylococcus aureus |
MRSP | Methicillin-resistant Staphylococcus pseudintermedius |
PMMA | Polymethylmethacrylate |
SSI | Surgical site infection |
TSB | Tryptone soy broth |
Footnotes
Microsilver BG antimicrobial powder, BioMedtrix Inc, Boonton, NJ.
BioMedtrix 3 veterinary bone cement 20 g, BioMedtrix Inc, Boonton, NJ.
BioMedtrix 3G veterinary bone cement 20 g, BioMedtrix Inc, Boonton, NJ.
CryoStor beads, BioLife Solutions, Bothell, Wash.
Etest, Biomérieux Inc, Marcy l'Étoile, France.
Ultrasonic cleaner, model 2510, Branson Ultrasonic Corp, Danbury, Conn.
S-570 SEM, Hitachi, Chiyoda, Tokyo, Japan.
PROC MIXED, SAS, version 9.2, SAS Institute Inc, Cary, NC.
References
1. Perreten V, Kadlec K, Schwarz S, et al. Clonal spread of methicillin-resistant Staphylococcus pseudintermedius in Europe and North America: an international multicentre study. J Antimicrob Chemother 2010; 65: 1145–1154.
2. Weese JS. A review of post-operative infections in veterinary orthopaedic surgery. Vet Comp Orthop Traumatol 2008; 21: 99–105.
3. Gallagher AD, Mertens WD. Implant removal rate from infection after tibial plateau leveling osteotomy in dogs. Vet Surg 2012; 41: 705–711.
4. Nicoll C, Singh A, Weese JS. Economic impact of tibial plateau leveling osteotomy surgical site infection in dogs. Vet Surg 2014; 43: 899–902.
5. Osland AM, Vestby LK, Fanuelsen H, et al. Clonal diversity and biofilm-forming ability of methicillin-resistant Staphylococcus pseudintermedius. J Antimicrob Chemother 2012; 67: 841–848.
6. Ruscher C, Lubke-Becker A, Semmler T, et al. Widespread rapid emergence of a distinct methicillin- and multidrug-resistant Staphylococcus pseudintermedius (MRSP) genetic lineage in Europe. Vet Microbiol 2010; 144: 340–346.
7. Singh A, Walker M, Rousseau J, et al. Characterization of the biofilm forming ability of Staphylococcus pseudintermedius from dogs. BMC Vet Res 2013; 9: 93.
8. Jain A, Agarwal A. Biofilm production, a marker of pathogenic potential of colonizing and commensal staphylococci. J Microbiol Methods 2009; 76: 88–92.
9. Brooks JL, Jefferson KK. Staphylococcal biofilms: quest for the magic bullet. Adv Appl Microbiol 2012; 81: 63–87.
10. Donlan RM. Biofilms: microbial life on surfaces. Emerg Infect Dis 2002; 8: 881–890.
11. Costerton JW. Biofilm theory can guide the treatment of device-related orthopaedic infections. Clin Orthop Relat Res 2005; 437: 7–11.
12. Trampuz A, Widmer AF. Infections associated with orthopedic implants. Curr Opin Infect Dis 2006; 19: 349–356.
13. Lewis DD, Stubbs WP, Neuwirth L, et al. Results of screw/wire/polymethylmethacrylate composite fixation for acetabular fracture repair in 14 dogs. Vet Surg 1997; 26: 223–234.
14. Weh JM, Kraus KH. Use of a four pin and methylmethacrylate fixation in L7 and the iliac body to stabilize lumbosacral fracture-luxations: a clinical and anatomic study. Vet Surg 2007; 36: 775–782.
15. Olmstead ML. Canine cemented total hip replacements—state-of-the-art. J Small Anim Pract 1995; 36: 395–399.
16. Barth RE, Vogely HC, Hoepelman AIM, et al. ‘To bead or not to bead?’ treatment of osteomyelitis and prosthetic joint-associated infections with gentamicin bead chains. Int J Antimicrob Agents 2011; 38: 371–375.
17. Hanssen AD. Prophylactic use of antibiotic bone cement: an emerging standard—in opposition. J Arthroplasty 2004; 19: 73–77.
18. Hanssen AD, Spangehl MJ. Practical applications of antibiotic-loaded bone cement for treatment of infected joint replacements. Clin Orthop Relat Res 2004; 427: 79–85.
19. Neut D, Kluin OS, Thompson J, et al. Gentamicin release from commercially-available gentamicin-loaded PMMA bone cements in a prosthesis-related interfacial gap model and their antibacterial efficacy. BMC Musculoskelet Disord 2010; 11: 258.
20. Méndez JA, Aguilar MR, Abraham GA, et al. New acrylic bone cements conjugated to vitamin E. J Biomed Mater Res 2002; 62: 299–307.
21. Neut D, de Groot EP, Kowalski RSZ, et al. Gentamicin-loaded bone cement with clindamycin or fusidic acid added: biofilm formation and antibiotic release. J Biomed Mater Res A 2005; 73: 165–170.
22. Oei JD, Zhao WW, Chu LR, et al. Antimicrobial acrylic materials with in situ generated silver nanoparticles. J Biomed Mater Res B Appl Biomater 2012; 100: 409–415.
23. Politano AD, Campbell KT, Rosenberger LH, et al. Use of silver in the prevention and treatment of infections: silver review. Surg Infect (Larchmt) 2013; 14: 8–20.
24. Prince H. Antimicrobial silver in orthopedic and wound care products. Orthop Design Tech 2008;May/June:61–68.
25. Cao H, Liu X, Meng F, et al. Biological actions of silver nanoparticles embedded in titanium controlled by micro-galvanic effects. Biomaterials 2011; 32: 693–705.
26. Ayala-Nunez NV, Lara Villegas HH, del Carmen Ixtepan Turrent L, et al. Silver nanoparticles toxicity and bactericidal effect against methicillin-resistant Staphylococcus aureus: nanoscale does matter. Nanobiotech 2009; 5: 2–9.
27. Sasaki T, Tsubakishita S, Tanaka Y, et al. Multiplex-PCR method for species identification of coagulase-positive staphylococci. J Clin Microbiol 2010; 48: 765–769.
28. Clinical and Laboratory Standards Institute. Performance standards for antimicrobial disk and dilution susceptibility tests for bacteria isolated from animals—third edition. Approved standard M31–A3. Wayne, Pa: Clinical and Laboratory Standards Institute, 2008.
29. Trencart P, Elce YA, Rodriguez Batista E, et al. Sterilization by gamma radiation of antibiotic impregnated polymethylmethacrylate and plaster of Paris beads. A pilot study. Vet Comp Orthop Traumatol 2014; 27: 97–101.
30. Stepanović S, Vuković D, Hola V, et al. Quantification of biofilm in microtiter plates: overview of testing conditions and practical recommendations for assessment of biofilm production by staphylococci. APMIS 2007; 115: 891–899.
31. Gatineau M, El-Warrak AO, Bolliger C, et al. Effects of sterilization with hydrogen peroxide gas plasma, ethylene oxide, and steam on bioadhesive properties of nylon and polyethylene lines used for stabliization of canine stifle joints. Am J Vet Res 2012; 73: 1665–1669.
32. Masini BD, Stinner DJ, Waterman SM, et al. Bacterial adherence to suture materials. J Surg Educ 2011; 68: 101–104.
33. Monsen T, Lovgren E, Widerstrom M, et al. In vitro effect of ultrasound on bacteria and suggested protocol for sonication and diagnosis of prosthetic infections. J Clin Microbiol 2009; 47: 2496–2501.
34. Segev G, Bankirer T, Steinberg M, et al. Evaluation of urinary catheters coated with sustained-release varnish of chlorhexidine in mitigating biofilm formation on urinary catheters in dogs. J Vet Intern Med 2013; 27: 39–46.
35. Zimmerli W, Trampuz A, Ochsner P. Prosthetic-joint infections. N Engl J Med 2004; 351: 1645–1654.
36. Alt V, Bechert T, Steinrucke P, et al. In vitro testing of antimicrobial activity of bone cement. Antimicrob Agents Chemother 2004; 48: 4084–4088.
37. Walenkamp G. Small PMMA beads improve gentamicin release. Acta Orthop Scand 1989; 60: 668–669.
38. Josefsson G, Gudmundsson G, Kolmert L, et al. Prophylaxis with systemic antibiotics versus gentamicin bone cement in total hip arthroplasty. A five-year survey of 1688 hips. Clin Orthop Relat Res 1990; 253: 173–178.
39. Chang Y, Tai C, Hsieh P, et al. Gentamicin in bone cement: a potentially more effective prophylactic measure of infection in joint arthroplasty. Bone Joint Res 2013; 2: 220–226.
40. Hendriks JGE, van Horn JR, van der Mei HC, et al. Backgrounds of antibiotic-loaded bone cement and prosthesis-related infection. Biomaterials 2004; 25: 545–556.
41. Srivastav AK, Nadkarni B, Srivastav S, et al. Prophylactic use of antibiotic-loaded bone cement in primary total knee arthroplasty: justified or not? Indian J Orthop 2009; 43: 259–263.
42. Klemm K. The use of antibiotic-containing bead chains in the treatment of chronic bone infections. Clin Microbiol Infect 2001; 7: 28–31.
43. Nelson CL, Evans RP, Blaha JD, et al. A comparison of gentamicin-impregnated polymethylmethacrylate bead implantation to conventional parenteral antibiotic therapy in infected total hip and knee arthroplasty. Clin Orthop Relat Res 1993; 205: 96–101.
44. Papich MG. Antibiotic treatment of resistant infections in small animals. Vet Clin North Am Small Anim Pract 2013; 43: 1091–1107.
45. Papich MG. Selection of antibiotics for meticillin-resistant Staphylococcus pseudintermedius: time to revisit some old drugs? Vet Dermatol 2012; 23: 352–360.
46. Frank LA, Loeffler A. Meticillin-resistant Staphylococcus pseudintermedius: clinical challenge and treatment options. Vet Dermatol 2012; 23: 283–291.
47. Rubin JE, Ball KR, Chirino-Trejo M. Antimicrobial susceptibility of Staphylococcus aureus and Staphylococcus pseudintermedius isolated from various animals. Can Vet J 2011; 52: 153–157.
48. Lu L, Sun RW, Chen R, et al. Silver nanoparticles inhibit hepatitis B virus replication. Antivir Ther 2008; 13: 253–262.
49. Marambio-Jones C, Hoek E. A review of the antibacterial effects of silver nanomaterials and potential implications for human health and the environment. J Nanopart Res 2010; 12: 1531–1551.
50. Sawant SN, Selvaraj V, Prabhawathi V, et al. Antibiofilm properties of silver and gold incorporated PU, PCLm, PC and PMMA nanocomposites under two shear conditions. PLoS ONE 2013; 8:e63311.
51. Loh JV, Percival SL, Woods EJ, et al. Silver resistance in MRSA isolated from wound and nasal sources in humans and animals. Int Wound J 2009; 6: 32–38.
52. Lara HH, Ayala-Nunez NV, del Carmen Ixtepan Turrent L, et al. Bactericidal effect of silver nanoparticles against multidrug-resistant bacteria. World J Microbiol Biotechnol 2010; 26: 615–621.
53. Percival SL, Woods E, Nutekpor M, et al. Prevalence of silver resistance in bacteria isolated from diabetic foot ulcers and efficacy of silver-containing wound dressings. Ostomy Wound Manage 2008; 54: 30–40.
54. Woods EJ, Cochrane CA, Percival SL. Prevalence of silver resistance genes in bacteria isolated from human and horse wounds. Vet Microbiol 2009; 138: 325–329.
55. Gristina A. Biomaterial-centered infection: microbial adhesion versus tissue integration. 1987. Clin Orthop Relat Res 2004; 427: 4–12.
56. van de Belt H, Neut D, Schenk W, et al. Staphylococcus aureus biofilm formation on different gentamicin-loaded polymethylmethacrylate bone cements. Biomaterials 2001; 22: 1607–1611.
57. Hall-Stoodley L, Stoodley P. Evolving concepts in biofilm infection. Cell Microbiol 2009; 11: 1034–1043.