Search Results

You are looking at 1 - 2 of 2 items for

  • Author or Editor: Peter K. Liaw x
  • Refine by Access: All Content x
Clear All Modify Search


OBJECTIVE To assess the contribution of antirotational pins (ARPs) and an intact fibula to the compressive strength of 4 tibial plateau leveling osteotomy (TPLO) constructs (bone and implants).

SAMPLE 20 hind limbs from 10 canine cadavers.

PROCEDURES Each hind limb was assigned to 1 of 4 TPLO constructs (construct in which the ARP was removed, constructs in which 1 or 2 ARPs were left in place, and construct in which the ARP was removed and the fibula was cut). Following TPLO completion, all limbs underwent mechanical testing that included 10,000 cycles of cyclic axial compression followed by testing to failure at a displacement rate of 1 mm/s. Displacement during cyclic testing; load generated at 0.5, 1.0, and 3.0 mm of displacement; ultimate load; and failure type were recorded for each limb. Mean values were compared among the groups.

RESULTS None of the specimens failed during cyclic testing. None of the variables assessed during mechanical testing differed significantly among the 4 groups. During testing to failure, the majority (17/20) of specimens failed as the result of a long oblique fracture through the first screw hole in the distal segment.

CONCLUSIONS AND CLINICAL RELEVANCE Results indicated that the axial compressive strength and stiffness of a TPLO construct were not significantly affected by the addition of 1 or 2 ARPs or the presence of an intact fibula. These findings appear to support removal of ARPs during uncomplicated TPLOs, but further research is warranted to assess the effect of ARP removal on bone healing and complication rates.

Full access
in American Journal of Veterinary Research


OBJECTIVE To evaluate mechanical properties of pigeon (Columba livia) cadaver intact humeri versus ostectomized humeri stabilized with a locking or nonlocking plate.

SAMPLE 30 humeri from pigeon cadavers.

PROCEDURES Specimens were allocated into 3 groups and tested in bending and torsion. Results for intact pigeon humeri were compared with results for ostectomized humeri repaired with a titanium 1.6-mm screw locking plate or a stainless steel 1.5-mm dynamic compression plate; the ostectomized humeri mimicked a fracture in a thin cortical bone. Locking plates were secured with locking screws (2 bicortical and 4 monocortical), and nonlocking plates were secured with bicortical nonlocking screws. Constructs were cyclically tested nondestructively in 4-point bending and then tested to failure in bending. A second set of constructs were cyclically tested non-destructively and then to failure in torsion. Stiffness, strength, and strain energy of each construct were compared.

RESULTS Intact specimens were stiffer and stronger than the repair groups for all testing methods, except for nonlocking constructs, which were significantly stiffer than intact specimens under cyclic bending. Intact bones had significantly higher strain energies than locking plates in both bending and torsion. Locking and nonlocking plates were of equal strength and strain energy, but not stiffness, in bending and were of equal strength, stiffness, and strain energy in torsion.

CONCLUSIONS AND CLINICAL RELEVANCE Results for this study suggested that increased torsional strength may be needed before bone plate repair can be considered as the sole fixation method for avian species.

Full access
in American Journal of Veterinary Research