Search Results

You are looking at 1 - 2 of 2 items for

  • Author or Editor: James D. Johnston x
  • Refine by Access: All Content x
Clear All Modify Search


OBJECTIVE To compare strain at the bone-pin and cast-pin interfaces among 3 transfixation pin–cast constructs applied to equine forelimbs.

ANIMALS 15 forelimbs from 15 adult horses.

PROCEDURES Limbs were randomly assigned to 1 of 3 constructs. Centrally threaded positive-profile pins were used for all constructs, and the most distal pin was placed just proximal to the epicondyles of the third metacarpal bone. Construct 1 consisted of two 6.3-mm-diameter pins spaced 4 cm apart at 30° to each other. Construct 2 was the same as construct 1 except the pins were placed 5 cm apart. Construct 3 consisted of four 4.8-mm-diameter pins spaced 2 cm apart and at 10° to one another. An osteotomy was created in the proximal phalanx. Strain gauges were attached to the cast and bone proximal to the pins and adjacent to the osteotomy. Limbs underwent compressive loading until failure. Simplified finite element models of constructs 1 and 3 were created to further evaluate strain and load transfer between the bone and cast.

RESULTS Strain did not differ between constructs 1 and 2. Compared with the 2-pin constructs, construct 3 had less strain at the bone-pin interface and more strain at the cast-pin interface, which indicated a greater amount of load was transferred to the cast of the 4-pin construct than the cast of the 2-pin constructs. Finite element modeling supported those findings.

CONCLUSIONS AND CLINICAL RELEVANCE Results suggested that the 4-pin construct was more effective in unloading the fractured bone than either 2-pin construct.

Full access
in American Journal of Veterinary Research



To compare the degree of white line separation created by increasing physiologic loads between bovine claws with and without toe-tip necrosis (TTN).


Cadaveric bovine hind limbs with (n = 10) and without (10) TTN.


Hind limbs in which 1 or both claws had evidence of apical white line separation were considered to have TTN. Hind limbs in which neither claw had evidence of white line separation were considered controls. Each hind limb was mounted in a materials testing system with the bottom surface of the hoof angled at approximately 5° to the horizontal plane such that the apex of the claws made initial contact with the clear testing surface to simulate physiologic loading conditions. A digital camera mounted underneath the testing surface was used to obtain images of the bottom of the hoof during the application of each of 3 increasing static loads (1, 2, and 3 kN). The images were analyzed with commercial image-processing software to quantify white line separation area.


White line separation area was significantly greater for claws with TTN than for control claws and increased as the applied load increased. White line separation was almost nonexistent in control claws and was not affected by increasing load.


Results suggested that mechanical loading exacerbated TTN, but compressive loading alone, even at excessive levels, did not initiate the condition. Interventions (eg, hoof blocks) that decrease loading of affected claws may be beneficial for the treatment of TTN at its earliest stages.

Full access
in American Journal of Veterinary Research