Search Results

You are looking at 1 - 3 of 3 items for

  • Author or Editor: Jeffery J. Biskup x
  • Refine by Access: Content accessible to me x
Clear All Modify Search

Abstract

OBJECTIVE To assess the contribution of antirotational pins (ARPs) and an intact fibula to the compressive strength of 4 tibial plateau leveling osteotomy (TPLO) constructs (bone and implants).

SAMPLE 20 hind limbs from 10 canine cadavers.

PROCEDURES Each hind limb was assigned to 1 of 4 TPLO constructs (construct in which the ARP was removed, constructs in which 1 or 2 ARPs were left in place, and construct in which the ARP was removed and the fibula was cut). Following TPLO completion, all limbs underwent mechanical testing that included 10,000 cycles of cyclic axial compression followed by testing to failure at a displacement rate of 1 mm/s. Displacement during cyclic testing; load generated at 0.5, 1.0, and 3.0 mm of displacement; ultimate load; and failure type were recorded for each limb. Mean values were compared among the groups.

RESULTS None of the specimens failed during cyclic testing. None of the variables assessed during mechanical testing differed significantly among the 4 groups. During testing to failure, the majority (17/20) of specimens failed as the result of a long oblique fracture through the first screw hole in the distal segment.

CONCLUSIONS AND CLINICAL RELEVANCE Results indicated that the axial compressive strength and stiffness of a TPLO construct were not significantly affected by the addition of 1 or 2 ARPs or the presence of an intact fibula. These findings appear to support removal of ARPs during uncomplicated TPLOs, but further research is warranted to assess the effect of ARP removal on bone healing and complication rates.

Full access
in American Journal of Veterinary Research

Abstract

OBJECTIVE To test ex vivo mechanical properties of 4 allograft fixation techniques for cranial cruciate ligament (CCL) replacement.

SAMPLE 30 stifle joints from canine cadavers.

PROCEDURES CCL-deficient stifle joints repaired by 1 of 4 techniques (n = 6/group) and CCL-intact stifle joints (control group; 6) were mechanically tested. Three repair techniques involved a patella-patella ligament segment (PPL) allograft: a tibial and femoral interference screw (PPL-2S), a femoral interference screw and the patella seated in a tapering bone tunnel in the tibia (PPL-1S), or addition of a suture and a bone anchor to the PPL-1S (PPL-SL). The fourth technique involved a deep digital flexor tendon (DDFT) allograft secured with transverse femoral fixation and stabilized with a tibial interference screw and 2 spiked washers on the tibia (DDFT-TF). The tibia was axially loaded at a joint angle of 135°. Loads to induce 3, 5, and 10 mm of femoral-tibia translation; stiffness; and load at ultimate failure with the corresponding displacement were calculated. Group means were compared with a multivariate ANOVA.

RESULTS Mean ± SD load for the intact (control) CCL was 520.0 ± 51.3 N and did not differ significantly from the load needed to induce 3 mm of femoral-tibial translation for fixation techniques PPL-SL (422.4 ± 46.3 N) and DDFT-TF (654.2 ± 117.7 N). Results for the DDFT-TF were similar to those of the intact CCL for all outcome measures.

CONCLUSIONS AND CLINICAL RELEVANCE The DDFT-TF yielded mechanical properties similar to those of intact CCLs and may be a viable technique to test in vivo.

Full access
in American Journal of Veterinary Research

Abstract

OBJECTIVE To evaluate the biochemical and biomechanical properties of native and decellularized superficial digital flexor tendons (SDFTs) and deep digital flexor tendons (DDFTs) harvested from the pelvic limbs of orthopedically normal dogs.

SAMPLE 22 commercially supplied tendon specimens (10 SDFT and 12 DDFT) harvested from the pelvic limbs of 13 canine cadavers.

PROCEDURES DNA, glycosaminoglycan, collagen, and protein content were measured to biochemically compare native and decellularized SDFT and DDFT specimens. Mechanical testing was performed on 4 groups consisting of native tendons (5 SDFTs and 6 DDFTs) and decellularized tendons (5 SDFTs and 6 DDFTs). All tendons were preconditioned, and tension was applied to failure at 0.5 mm/s. Failure mode was video recorded for each tendon. Load-deformation and stress-strain curves were generated; calculations were performed to determine the Young modulus and stiffness. Biochemical and biomechanical data were statistically compared by use of the Wilcoxon rank sum test.

RESULTS Decellularized SDFT and DDFT specimens had significantly less DNA content than did native tendons. No significant differences were identified between native and decellularized specimens with respect to glycosaminoglycan, collagen, or protein content. Biomechanical comparison yielded no significant intra- or intergroup differences. All DDFT constructs failed at the tendon-clamp interface, whereas nearly half (4/10) of the SDFT constructs failed at midsubstance.

CONCLUSIONS AND CLINICAL RELEVANCE Decellularized commercial canine SDFT and DDFT specimens had similar biomechanical properties, compared with each other and with native tendons. The decellularization process significantly decreased DNA content while minimizing loss of extracellular matrix components. Decellularized canine flexor tendons may provide suitable, biocompatible graft scaffolds for bioengineering applications such as tendon or ligament repair.

Full access
in American Journal of Veterinary Research